June 22, 2020
© S&C Electric Company 2020, all rights reserved
Instruction Sheet 461-521
TripSaver
®
II Cutout-Mounted Recloser
Outdoor Distribution (15.5 kV and 25 kV)
TripSaver
®
II Communications via Gateway
Pairing Quickstart Guide
Pairing Guide
Table of Contents
Section Page Section Page
Introduction
Qualified Persons ........................... 2
Read this Instruction Sheet ................... 2
Retain this Instruction Sheet. . . . . . . . . . . . . . . . . . . 2
Proper Application .......................... 2
Warranty .................................. 2
Safety Information
Understanding Safety-Alert Messages ........... 3
Following Safety Instructions .................. 3
Replacement Instructions and Labels ........... 3
Location of Safety Labels ..................... 4
Safety Precautions ......................... 5
Shipping and Handling
Packing ................................... 6
Inspection ................................ 6
Handling .................................. 6
Storage ................................... 6
Returning ................................. 6
Equipment Required ......................... 6
Quick Pairing Guide
Overview .................................. 7
Placing a TripSaver II Recloser in Gateway Mode .. 7
Connecting to a TripSaver II Communications Gateway
with a PC ............................... 8
Pairing a TripSaver II Recloser with a Communications
Gateway ................................10
Troubleshooting
Signal Interference ..........................14
Pairing a Previously Paired TripSaver II Recloser with
a New Communications Gateway ............14
Pairing Process Takes Longer Than Expected ....15
To Next Page
Need help?
General
