S&C TripSaver II User Manual

S&C Instruction Sheet 461-504 37
Tools Menu
Under the Options feature, preferences can be changed for PC-to-TripSaver II commu-
nication-related logging, several communication parameters can be set, and the default
settings the software uses under the Standalone (ofine) mode can be changed.
The two logging-related features are mainly intended for engineering-debugging use in
case the communications encounter any unexpected errors. S&C recommends that cus-
tomers use default settings unless instructed to do otherwise by S&C technical support.
Note: Customer privacy is important to us. No logging information is sent back to S&C
or any third-party company over the Internet. All logging information is stored locally
on the computer.
Logging
Enable Log. Select the check box to enable communication-related logging. Deselect the
check box to disable communication-related logging. When deselected, all elds under
the Logging tab will be grayed out. Default is Enabled.
The interaction between the PC and the USB transceiver is also included in the log.
Log File Directory. This directory displays where the communication-related logging
les will be saved. Type a full directory path into the eld, or use the Browse button on
the right to select a desired directory. This eld is grayed out when the Default check
box (for the Log File Directory) is selected.
Note: Do not select a directory on a network drive.
Default check box. Select the check box to use the default log le directory. Uncheck
the box to use the directory selected previously. The default log file directory is
C:\Users\(yourcomputername)\Documents\S&C Electric\SCC. When the default check
box is selected, the Log File Directory eld will be grayed out and display the default
log le directory. The default for the Default check box is the Enabled setting.
Level. Three levels of logging details are available for selection:
• Basic. This level logs sufcient error/warning information for initial analysis. It is
the default logging level.
• Medium. This level logs all trafc (e.g. packets exchanged), and is to be used by trained
S&C support personnel. Medium is the default logging level at software installation.
• Detailed. This level traces the code execution in addition to those being logged
at the Medium level and is to be used only by S&C Software Developers to look for
difcult bugs.
Maximum File Size (kB). Specify the maximum size, in kilobytes, allowed for each
log le. (unlimited: 0; default: 10000)
Number of Old Log Files. Specify the maximum number of old log les to keep in the
selected directory. (unlimited: 0; default: 500)
Restore Defaults. Click on this button to change settings under the present tab to their
default values. This button is grayed out when all settings under the present tab are the
same as their default values.
Options

S&C TripSaver II Specifications

General

Brand	S&C
Model	TripSaver II
Category	Industrial Electrical
Language	English