8 S&C Instruction Sheet 461-504
Shipping and Handling
Examine the shipment for external evidence of damage as soon after receipt as possible,
preferably before the carrier departs. Check the bill of lading to make sure the listed
shipping packages are present.
If there is visible loss and/or damage:
1. Notify the delivering carrier immediately.
2. Ask for a carrier inspection.
3. Note condition of shipment on all copies of the delivery receipt.
4. File a claim with the carrier.
If concealed damage is discovered:
1. Notify the delivering carrier within 15 days of receipt of shipment.
2. Ask for a carrier inspection.
3. File a claim with the carrier.
Also, notify S&C Electric Company in all instances of loss and/or damage.
NOTICE
Handle the configuration kit with care. DO NOT drop the components or subject
any of their parts to undue stress during use. Only remove components from the
carrying case when they are ready to be used. After a TripSaver II recloser has been
configured, always return components to the carrying case for protection.
In addition, DO NOT drop a TripSaver II recloser or subject any of its parts to undue
stress during configuration or installation. Only remove a TripSaver II recloser from
the carton when it is ready for configuration or installation. After a TripSaver II recloser
has been configured, always return it to its carton until ready for installation.
Inspection
Handling
To Next Page
Loading...
Need help?
General
