82 S&C Instruction Sheet 461-504
Informational and Settings Screens
The Status screen is available under the Connected (online) mode or when a snapshot
le is open. When a TripSaver II recloser is connected, the Status screen will be the rst
screen to open, and it will populate with data from the TripSaver II recloser. The Status
screen presents status information, a summary of TCC curve settings, and general recloser
information. This screen is view-only; there are no data-entry elds. See Figure 116.
Status Screen
Figure 116. The Status screen.
Status Information
The status information is shown at the top section of this screen. See Figure 117.
Figure 117. The Status information area.
To Next Page
Loading...
