S&C Vista SD - Safety Information; Understanding Safety Alert Messages

4 S&C Instruction Sheet 695-505
Safety Information
Understanding
Safety-Alert
Messages
Several types of safety-alert messages may appear throughout this instruction sheet and
on labels and tags attached to your S&C Vista SD Underground Distribution Switchgear.
Familiarize yourself with these types of messages and the importance of these various
signal words:
DANGER
“DANGER” identifies the most serious and immediate hazards that will likely result in
serious personal injury or death if instructions, including recommended precautions,
are not followed.
WARNING
“WARNING” identifies hazards or unsafe practices that can result in serious personal
injury or death if instructions, including recommended precautions, are not followed.
CAUTION
“CAUTION” identifies hazards or unsafe practices that can result in minor
personal injury, including recommended precautions, are not followed.
NOTICE
“NOTICE” identifies important procedures or requirements that can result in prod-
uct or property damage if instructions are not followed.
Following
Safety Instructions
If you do not understand any portion of this instruction sheet and need assistance,
contact your nearest S&C Sales Office or S&C Authorized Distributor. Their
telephone numbers are listed on S&C’s website
sandc.com. Or call the S&C Global
Monitoring and Support Center at 1-888-456-1100.
NOTICE
Read this instruction sheet thoroughly and
carefully before installing your S&C Vista SD
Underground Distribution Switchgear.
Replacement
Instructions and
Labels
If you need additional copies of this instruction sheet, contact your nearest S&C Sales
Ofce, S&C Authorized Distributor, S&C Head quarters, or S&C Electric Canada Ltd.
It is important that any missing, damaged, or faded labels on the equipment be replaced
immediately. Replacement labels are available by contacting your nearest S&C Sales
Office, S&C Authorized Distrib utor, S&C Headquarters, or S&C Electric Canada Ltd.