Getting Started
Connecting iPhone to iXpand Base
Physical Connection
In the box you will find an iXpand Base with a premium, sturdy metal body, along
with fast charger with 6ft cable and an Ultra SD card (32, 64, 128 & 256 GB). Connect
the cable to a wall outlet on one side and to the Micro USB slot in the iXpand Base on
the other. Now the Base is connected to power.
1. Turn the iXpand Base on the back side and you will see the slot for a USB port
2. Take your Lightning cable (not included), insert the USB side to the slot provided
(as shown in the Fig.1)
SD Card Slot (Card
provided with Device)
15Watt (3 Amp) fast charger with 6ft cable
To Next Page
Loading...
Need help?
General