4
Voice recording ` 21
This chapter helps you get started recording to
voice with your SanDisk Sansa™ m200 Series
MP3 Player.
Voice recording
Your player has a recording feature that can record voice to a file. This chapter helps you to
become familiar with the Recorder features.
Using the Recorder Controls
Your player has three modes of operation: Music, FM Radio and Recorder. To record your
voice, you need to be in Voice Recording mode. Follow these steps:
1. Press the Power/Menu Button briefly once. The SanDisk Welcome message will
appear onscreen after a moment then disappear. (Can’t find the Power/Menu
Button on your player? See The Basic Controls section on page 3.)
WARNING: If the onscreen message says "Locked" and then shuts off, you
need to locate the Hold Button on the left side of your player. Slide that button
left to unlock your device. Then repeat Step 1 above. See The Basic Controls
section on page 3 if you cannot find the Hold Button.
2. If you do not see the Recorder onscreen, briefly press the Power/Menu Button on
the right side of your player. The software Menu will appear. Use the
Repeat/AB/Down Button to scroll and highlight Recorder Modes. Press the Select
Button to Recorder Modes.
When you are in Recorder mode, the screen shown in Figure 5 will appear on your player.
To Next Page
Loading...
