What You Need to Begin
To add music to the Sansa m200 series MP3 Player, the following are needed:
Intel Pentium PC or equivalent.
Windows XP (Windows Media Player 9 or 10).
CD-ROM drive
USB 2.0 port for High-Speed transfer.
Supports MP3, WMA, secure WMA and Audible audio file formats
Your Sansa Package contains:
Sansa m200 Series MP3 Player
Earphones
Armband and Case
AAA battery
USB 2.0 travel cable
CD with User Manual
Quick Start Guide
Installing the Battery
Follow the steps as shown in Figure 1:
1. Turn your player over, so the backside faces up, and locate the battery door at the
back of the player.
2. Gently depress the catch at the bottom of the battery cover and lift up.
3. Push the battery down into the battery area of the player, placing the flat end (--) of
the battery against the spring in the battery area. The protruding top (+) of the
battery slips down and under. The battery should fit snugly.
4. Replace the battery cover until it snaps closed.
Quick Start ` 2
To Next Page
Loading...
