EasyManuals Logo

SanDisk Sansa User Manual

SanDisk Sansa
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
What You Need to Begin
To add music to the Sansa e100 MP3 Player, the following are needed:
Intel Pentium PC or equivalent.
Windows 2000 or Windows XP (Windows Media Player 9 or 10).
CD-ROM drive
USB 2.0 port required for High-Speed transfer.
Supports MP3, WMA, secure WMA and Audible audio file formats
Your Sansa Package contains:
Sansa e100 Series MP3 Player
Earphones
Armband
AAA battery
USB 2.0 travel cable
CD with valuable software and User Manual
Quick Start Guide
Installing the Battery
Follow the steps as shown in Figure 1:
1. Turn your player over, so the backside faces up, and locate the battery door at the
bottom of the player.
2. Gently depress and pull the battery cover out towards the outside edge of your
player.
3. Lift off the battery cover.
4. Push the battery down into the battery area of the player, placing the smooth
bottom (--) of the battery against the spring in the battery area. The protruded top
(+) of the battery slips down and under. The battery should fit snugly.
5. Replace the battery cover until it snaps closed.
Quick Start ` 2

Other manuals for SanDisk Sansa

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SanDisk Sansa and is the answer not in the manual?

SanDisk Sansa Specifications

General IconGeneral
Expandable MemorymicroSD card slot (Sansa Clip+, Sansa Fuze, Sansa View)
Audio FormatsMP3, WMA
FM RadioYes
Voice RecorderYes (varies by model)
WeightApprox. 2.5 oz (varies by model)
Storage Capacity2GB, 4GB, 8GB
Display1.8-inch color LCD (varies by model)

Related product manuals