Need help?Do you have a question about the S&P SILENT CHZ and is the answer not in the manual?
General| Duct Diameter | 100 mm |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| IP Rating | IP45 |
| Material | Plastic |
| Category | Fan |
| Airflow | 95 m³/h |
| Noise Level | 26.5 dB(A) |
| Speed | 2400 RPM |
| Power | 8 W |
| Connector | Terminal block |
| Bearing Type | Ball bearing |
| Dimensions | 158 x 158 x 107 mm |
| Application | Ventilation |
| Mounting | Wall/Ceiling |
| Model | SILENT-100 CHZ |
Guides the user through the process of installing the extractor fan.
Details on how to connect the electrical wiring for the extractor fan.
Explains the function and settings of the 8 dip-switches for fan configuration.
Describes the automatic operation of the extractor based on humidity levels.
Details the 'Interval' function for managing fan operation in specific conditions.
Describes the 'start-up timer' function to delay fan activation.
Lists the default factory settings for the fan's operational modes.
Provides instructions for routine cleaning and upkeep of the extractor fan.
Information on warranty, faults, and contacting the dealer.
Guidance on the proper disposal and recycling of the appliance.
To Next Page