Sandstrom Easy-glide SFMGL18 User Manual

Fitting the Back Plate and Covers
A11
A8
A11
A6
A13
A12
A13
A9
+
A10
1. Slide the plastic covers (A11) over the wall mount and
screw the cable management clip to the front of the
mount.
2. Attach the back plate (A12) to the mount using 3 nuts
(A6) and tighten the nuts using the Multi Tool (A9 + A10).
3. Fit the back plate edges (A13).
Fitting the TV Mounts to the Back of the TV
Consult your TVs instruction maunal to find out which vesa mount screw size you should use M5, M6 or M8. You will only need to use 4 of the
supplied screws. If the back of your TV is uneven you may need to use some spacers when attaching the TV Mounts to the TV.
B6 B7B5
B2 B3B1 B4
B10
B9B8
A5
A14
Screw M8
Screw M5-M6
Use spacers provided for mounting TVs with
curved/recessed backs, recessed mounting
holes, or to allow access to A/V inputs.
Place the soft pad as desired to act as
cushion between the TV and the bracket.
A5
Sandstrom Easy Glide Full Motion TV Mount SFMGL18 Manual.indd 6 06/02/2020 09:05

Sandstrom Easy-glide SFMGL18 Specifications

General

Brand	Sandstrom
Model	Easy-glide SFMGL18
Category	TV Mount
Language	English