Sandstrom Easy-glide SFMGL18 - Product Specifications and Safety; TV Mount Specifications; Critical Pre-Installation Warnings

Safety
WARNING! READ THE FOLLOWING BEFORE STARTING INSTALLATION
• Assembly is required. Installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal
injury and property damage.
• The supplied TV bracket is only for use on vertical walls constructed from solid brick, solid concrete, solid wood and solid wooden
columns.
• It is the installers’ responsibility to verify that the wall will safely support the total load of the TV and the TV bracket. Never exceed the
designated maximum TV load.
• Parts are heavy; take care when handling. For some steps, 2 people are required for installation.
• Check the TV bracket frequently to ensure that it is safe and secure. Additional tools (not included) are required for the installation. Do
not over-tighten screws.
• Keep this instruction manual for future reference.
TV LOAD
20 - 35 kg
KG
TV SIZE
55” - 70”
DISTANCE TO WALL
80 - 675 mm
VESA COMPLIANCE
200 x 100 – 600 x 400 mm
TILT ANGLE
-5° ~ +10°
SWIVEL ANGLE
-90° ~ +90°
ROTATE ANGLE
-4° ~ +4°
Use the
Spanner
provided
Use the
Spanner
provided
Sandstrom Easy Glide Full Motion TV Mount SFMGL18 Manual.indd 2 06/02/2020 09:05