EasyManuals Logo

Sandstrom S4SSFF12 User Manual

Sandstrom S4SSFF12
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
Operation
Temperature Setting
Fridge Compartment Temperature Setting
Touch the cooler control repeatedly to adjust the fridge temperature between 2°C to 8°C and SC.
Freezer Compartment Temperature Setting
As a Freezer Mode
Touch the zone 1 (left freezer compartment) or zone 2 (right freezer compartment) control repeatedly
to adjust the freezer compartment temperature between -16°C to –24°C and SF.
As a Cooler Mode
1. Touch and hold the zone 1 (left freezer compartment) or zone 2 (right freezer compartment)
control for 3 seconds to switch to cooler mode. The temperature will be automatically set to 8°C.
2. Touch the zone 1 (left freezer compartment) or zone 2 (right freezer compartment) control
repeatedly to adjust the freezer compartment temperature between 2°C to 8°C.
If the temperature in the fridge storage compartment is too low, the super cooling function may
not work.
The super cooling function will automatically deactivate after 4 to 6 hours.
In Super Cooling mode, more energy will be consumed.
If Zone 2 is set to Cooler mode or to SF, Super Cooling will not be available.
Super Cooling
Touch the cooler control repeatedly until the temperature display shows SC and the sc indicator
illuminates. This function will automatically deactivate when the fridge storage compartment temperature
decreases to 2°C.
The temperature shown on the display is the temperature you have set the fridge/freezer to get to.
NOT the actual temperature inside the fridge/freezer.
It may take a few hours (approx. 5 hours) for the unit to reach the target temperatures. The time to
reach the set temperatures will vary depending on the temperature difference and the type and
amount of food stored in the compartments.
Please note the Ice Trays are in Zone 2. Any ice in these trays will melt if set to cooler mode.
Make sure you don’t have any frozen food in zone 1 or 2 if you are activating the cooler mode, or
remove any food you do not want freezing if setting to Freezer mode.
If setting from Freezer to Cooler mode, leave the door open for 4 hours to allow the temperature to
rise.
If only one zone is to be set as Freezer, then use Zone 1.
Do not use Zone 2 in cooler mode at ambient temperatures over 38°C.
Super Freezing
Touch the zone 1 (left freezer compartment) or zone 2 (right freezer compartment) control repeatedly
until the temperature display shows SF and the sf indicator illuminates. This function will automatically
deactivate when the freezer storage compartment temperature decreases to -32°C.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sandstrom S4SSFF12 and is the answer not in the manual?

Sandstrom S4SSFF12 Specifications

General IconGeneral
BrandSandstrom
ModelS4SSFF12
CategoryFreezer
LanguageEnglish

Related product manuals