Automatically Setting the Clock
The clock will be updated automatically if you can receive DAB/FM signal in
your location.
In order to synchronise to the current local time, you must leave it on the
DAB/FM station for a period of time. It may take about 1-2 minutes to
receive the time signal.
If there is no DAB broadcast in your area, switch the unit into
FM mode to receive the time signal, or you may set the clock
manually (Refer to “Setting the Time and Date” section below).
Adjusting the Brightness
In Standby mode, press the DIMMER dial repeatedly to select the
brightness level.
System Settings
Setting a Sleep Timer
You can set a sleep timer so if you are listening to your radio and fall asleep,
it will automatically switch o at the preset time. The sleep timer can be
activated for up to a maximum of 90 minutes.
1. In ON mode, press and hold the INFO/MENU button, and then turn the
–VOLUME+/SELECT/SNOOZE dial or press the
button to select
<System>. Press the –VOLUME+/SELECT/SNOOZE dial to conrm.
2. Turn the –VOLUME+/SELECT/SNOOZE dial or press the
button
to select <Sleep>. Press the –VOLUME+/SELECT/SNOOZE dial to
conrm.
3. Turn the –VOLUME+/SELECT/SNOOZE dial or press the
button
to select between <Sleep o>, <15 minutes>, <30 minutes>, <45
minutes>, <60 minutes> or <90 minutes>, and then press the –
VOLUME+/SELECT/SNOOZE dial to conrm.
4. When a sleep timer has been set, the “
” symbol will be displayed.
18