15
GB
DPI Setting
Press the DPI button on the mouse repeatedly to adjust
the resolution (1000 - 1500 - 2000 dpi).
Hints and Tips
Mouse not working:
• Check that the power switch is in the on position.
• Make sure the Nano Dongle is plugged into a USB
port and the computer is on or try the Nano Dongle
in a dierent USB port.
• Check battery installation. Replace battery if needed.
• If mouse performance is slow or intermittent around
a wireless network, unplug the Nano Dongle from
the USB port and then reinsert it. To reactivate the
mouse, switch it on, o and on again using the
ON/OFF switch on the bottom of the mouse.
• Repeat the connection procedure. You can also try
moving the mouse closer to the Nano Dongle.
• If the mouse is moving erratically, change the
working surface which the mouse is operating on.
To Next Page
Loading...
