EasyManua.ls Logo

Saneo A010A-12C - Automatic Function Mode Selection

Saneo A010A-12C
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fig.6
Check that the exhaust pipe is installed correctly.
Precautions to be taken:
- When using the cooling and dehumidifying functions, keep an interval
of at least 3 minutes between each function.
- The plug is well adapted for use with this air conditioner.
- Do not connect several devices to the same outlet.
- Power supply: AC220-240V, 50HZ
10. Automatic function
- Depending on the room temperature, select the desired function :
cooling, dehumidification or ventilation (see table below).
Rooom
Temperature (Tr)
Tr<23
23℃≤Tr
26
Tr 26
Mode
Heating
Dehumidify
Cooling
Set Temperature
21
23
25

Related product manuals