EasyManua.ls Logo

Sangean ATS-606 A User Manual

Sangean ATS-606 A
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Sangean ATS-606 A and is the answer not in the manual?

Sangean ATS-606 A Specifications

General IconGeneral
TypePortable Radio
Frequency Range (FM)87.5 - 108 MHz
Tuning Steps (AM)9 kHz / 10 kHz
DisplayLCD
Headphone JackYes
Tuning Steps (FM)50 kHz
Power Source4 x AA batteries or AC adapter
SpeakerBuilt-in
Weight300 g (12 oz) without batteries
Tuning SystemDigital PLL Synthesizer
Dimensions165 x 104 x 34 mm (6.5 x 4.1 x 1.3 inches)

Summary

Block Diagram

Alignment Instructions

Alignment For Clock Time Accuracy

Procedure to calibrate the clock time accuracy using specific instruments.

Alignment For PLL Frequency

Steps to align the Phase-Locked Loop frequency using a frequency counter.

Alignment For AM 2ND Local OSC

Procedure to adjust the AM second local oscillator frequency.

Alignment For AM 2ND IF

Steps to align the AM second intermediate frequency using a sweep generator.

Alignment For AM Sensitivity

Procedure to adjust AM band sensitivity using signal generators and SSVM.

Alignment For FM Sensitivity

Procedure to optimize FM band sensitivity using signal generators and SSVM.

Troubleshooting Flow Chart

Weak Sensitivity on FM Mode

Flow chart for diagnosing weak sensitivity issues in FM reception.

Weak Sensitivity on AM Band

Flow chart for troubleshooting weak sensitivity problems on the AM band.

PLL Does Not Work

Troubleshooting guide for when the Phase-Locked Loop (PLL) functionality fails.

Power Can Not Be Turned On

Flow chart to diagnose and resolve issues where the device fails to power on.

IC Circuit Block Diagrams

Voltage Lists

Schematic Diagram

Related product manuals