EasyManua.ls Logo

Sangean ATS-818ACS - User Manual

Sangean ATS-818ACS
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Question and Answer IconNeed help?

Do you have a question about the Sangean ATS-818ACS and is the answer not in the manual?

Summary

Features

Control Locations

Choosing a Power Supply

Using Batteries

Instructions for installing and using batteries in the receiver for power.

Using House Current [AC]

Guidance on powering the receiver using an AC adapter and household outlet.

Preliminary Settings

Setting the Clock

Steps to set the 24-hour clock on the receiver, including time input and confirmation.

Setting Dual Time

Procedure to program a second time zone for quick access to local or world time.

Band Selection

Tuning Mode

Adjusting the Antenna

Guidance on positioning the telescopic and internal antennas for optimal reception on different bands.

Direct Tuning

Method for directly entering a station's frequency using the keypad for precise tuning.

Manual Tuning

Technique for tuning stations by incrementally adjusting frequency using buttons or the tuning knob.

Scan Tuning

Procedure to automatically scan frequencies within a band to find active stations.

Memory Tuning

Storing a Frequency

Steps to save favorite radio frequencies into the receiver's memory for quick recall.

Recalling a Frequency

How to access and tune to previously stored radio stations using memory presets.

Clock Radio Operation

Setting the Alarm

Instructions for setting the radio to wake you with an alarm buzzer or program at a specific time.

Setting the Sleep Timer

Procedure to set the radio to automatically turn off after a predetermined period.

Special Tuning Techniques and Controls

RF Gain Control

Adjusting receiver sensitivity to optimize signal reception and reduce interference.

AM Narrow;Wide Selectivity Switch

Using the switch to improve reception by reducing interference from adjacent stations.

Headphone Use

Lock Switch Use

External Antenna Use

MW Step Selector Switch

Using Your Cassette Recorder

To Play a Cassette Tape

Steps to insert and play a cassette tape in the recorder.

Using Fast-Forward (FF) and Rewind

Instructions for fast-forwarding and rewinding cassette tapes, including caution notes.

To Record with the Built-in Microphone

Procedure for recording audio using the radio's integrated microphone.

To Record from the Radio

Steps to record radio broadcasts directly from the receiver onto a cassette tape.

To Record from the Radio using the Program Feature

Guide to using the timer function for scheduled radio program recording.

Special SSB;CW Reception Techniques

To Receive CW

Detailed steps for tuning and receiving Continuous Wave (CW) Morse code transmissions.

To Receive SSB Voice

Instructions for tuning and receiving Single Side Band (SSB) voice transmissions.

Care and Maintenance

Specifications

Sangean ATS-818ACS Specifications

General IconGeneral
BrandSangean
ModelATS-818ACS
CategoryPortable Radio
LanguageEnglish

Related product manuals