Sangean DDR-60BT - Setting the Clock Manually

GB
16
Setting the clock manually
1. Press the Standby button to switch on your radio.
2. Press and hold the Menu button to access the menu for the current mode.
3. Rotate the Tuning control until ‘System ‘ appears on the display. Press and release the
Tuning control.
4. Rotate the Tuning control until ‘Time’ appears on the display. Press and release the Tuning
control button.
5. Rotate the Tuning control until ‘Set Time/Date’ appears on the display.
6. PressandreleasetheTuningcontrol.Thehourdigitswillashonthedisplay.Rotatethe
Tuning control to set the desired hour.
7. PressandreleasetheTuningcontrol.Theminutedigitswillashonthedisplay.Rotatethe
Tuning control to set the desired minute.
● Iftheradiohasbeensettousea12hourformat,therewillbeanoptionhereforsettingAM
or PM for the clock time.
8. PressandreleasetheTuningcontrol.Thedaywillashonthedisplay.RotatetheTuning
control to change the day as needed.
9. PressandreleasetheTuningcontrol.Themonthwillashonthedisplay.RotatetheTuning
control to set the current month.
10.PressandreleasetheTuningcontrol.Theyearwillashonthedisplay.RotatetheTuning
controltosetthecurrentyear.ThenpressandreleasetheTuningcontroltoconrmtheclock
setting. The display will show ‘Time Saved’ then exit the menu.
<System >
DAB
System
<Time
>
Time
<Set Time/Date >
Set time
09:00
Set time
09:30
Set date
11- 1-2013
Set date
11- 1-2013
Set date
11- 1-2013
Time
Saved