Sangean DDR-66BT - Getting Started; Before You Can Use This Product

05
GB
Overview of the main unit and the remote
control
1
Left and right speaker
2
LCD Display
3
CD slot
4
CD eject button (
)
● Press to eject the CD from the CD slot.
5
MEDIA button
● Press repeatedly to switch to the USB, SD, CD or
Bluetooth mode.
6
INFO / MENU button
● Press to cycle through information from the
playback source on the radio's display.
● Press and hold to open the menu for the current
mode.
7
BACK / Bluetooth pair button
● Press to go back one step in the radio's menus.
● While in Bluetooth mode, press and hold to switch
to the Bluetooth pairing mode.
8
Tuning up / Next track / Fast forward button (
/ Ʌ)
● Press to increase the frequency in the FM radio
mode.
● Press to go to the next track in the USB, SD, CD,
Bluetooth, Spotify modes.
● Press to navigate in menus.
● Press and hold to auto scan to the next station
with a higher frequency in the FM radio mode.
● Press and hold to fast forward in the USB, SD, CD,
Bluetooth modes.
9
Tuning down / Previous track / Rewind button (V /
)
● Press to decrease the frequency in the FM radio
mode.
● Press to go to the start of the track or the previous
track in the USB, SD, CD, Bluetooth, Spotify
modes.
● Press to navigate in menus.
● Press and hold to auto scan to the next station
with a lower frequency in the FM radio mode.
● Press and hold to fast rewind in the USB, SD, CD,
Bluetooth modes.
10
SELECT / Stop button (
) / Preset button
● Press to stop playback in the USB, SD, CD modes.
● Press to open / select an item in the radio's
menus.
● Press to enter the “Recall from Preset” menu in
the DAB / FM radio, Internet radio and Podcasts
modes.
● Press and hold to enter the “Save to Preset” menu
in the DAB / FM radio, Internet radio and Podcasts
modes.
11
PLAY / Pause button (
)
● Press to start playback or to pause / resume
playback.
12
VOLUME up / down button
● Press VOLUME + to increase volume.
● Press VOLUME - to decrease volume.
13
Remote control sensor
● Infrared sensor for receiving remote control input.
14
Record button
● Press to record the radio's audio output to a USB
device or SD card.
15
ALARM button
● While the radio is powered on, press to go to the
radio's alarm menu.
● While the radio is in standby mode, press
repeatedly to enable / disable the radio's alarms.
16
RADIO button
● Press repeatedly to select the Internet radio,
Podcasts, Spotify, Amazon Music, Deezer, DAB
radio, FM radio or AUX in mode.
17
Power button (
) / Sleep button
● Press to turn the radio on / off.
● Press and hold to enter the sleep timer setting
and then set the sleep timer using the Tuning up /
down buttons.
18
DAB / FM antenna
● Extend and position this antenna to improve
reception in the DAB and FM modes.
19
SD card slot
● Insert an SD card to playback audio from the SD
card or to record audio to the SD card.
20
Wi-Fi antenna
● Position this antenna correctly to improve the
radio's Wi-Fi reception.
21
AC IN socket
● AC IN socket for AC power cord (100-240V ~
50/60 Hz, 32W)
22
LAN Ethernet port
● Connect an Ethernet cable to connect the radio to
a Local Area Network.
23
AUX IN socket
● 3.5mm socket for audio input from external device.
24
LINE OUT socket
● 3.5mm socket for audio output to an extern device.
25
Headphones socket
● 3.5mm socket for stereo audio output to
headphones or earphones.