Sangean PR-D3 - Snooze (only available in alarm buzzer); Sleep timer

11
GB
Snooze (only available in alarm buzzer)
1. When the alarm buzzer sounds, press any button other than the
Standby button will silence the alarm for 5 minutes. “ “ will
appear on the display.
2. To cancel the snooze timer while the alarm is suspended, press
the Standby button.
Sleep timer
Your radio can be set to turn off automatically after a preset time
has elapsed. The Sleep Timer setting can be adjusted between
15,30, 45, 60, 90 and 120 minutes.
1. Press and hold the Power/Sleep timer button until you hear a beep
and the symbol of shows on the display.
2. Holding the Power/Sleep timer button down will cycle through
the times of 120, 90, 60, 45, 30 and 15 minutes.
3. Release the button when the desired sleep timer option appears
on the display. Now the symbol will appear on the display. The
radio will shut off after a preset time has elapsed.
Note:
To deactivate the sleep timer, simply press and release the Power
button.