Sangoma P Series Phones
Internal/External Dialing:
• Pick up the handset or press a line key and dial a phone number or extension.
-or-
• Dial a number and press the Dial softkey and your call will be hands free.
You can also use contacts or call log to find the number you want, then press dial.
**Do not press 9 before dialing a phone number.
Receiving calls:
Pick up the handset, or press a softkey:
Answer -Answers the call hands free.
Ignore -Mutes the ring.
Transfer -Transfer the call.
Send VM -Sends the call to your voice mail.
Redial:
Press the Redial button to redial the last call you made.
Hold:
Press Hold, the line key flashes red. Press either the flashing line key or the Resume softkey to resume the call.
Contacts:
Contacts are used for rapid dialing users within the phone system. Press the up and down arrows to scroll. You can
see the person’s Status by pressing the Show softkey in the list of contacts when transferring a call or creating a
conference call.
Transfer:
Assisted – During the call, press the Transfer button. Enter the number or press contacts softkey to find a number.
When someone answers, inform them of the call and press the transfer softkey and the call will be transferred.
Unassisted (blind) – During the call, press the Transfer button, enter the number or press Contacts to find a number.
Press the Transfer softkey and the transfer is completed.
Transfer to Voice Mail- If you used Contacts to transfer the call, you can press the Transfer VM softkey instead of
Transfer. That transfers the caller to the contacts Voice Mail.
Conference Calls:
During a call, press the Conference softkey. Dial the third participant’s number or use Contacts. Press the Conference
softkey to connect all participants. To split a conference into separates calls, press the Split softkey and select the
participant to drop from the call.
To Next Page
Need help?
General
