1. To use accessories remove hose from rear of cleaner by
lifting up and twisting.
2. Place desired accessory onto end of hose or wand.
HOW TO USE
1. Handle Release. Step on handle release to pull handle
back to a comfortable operating position. To lower handle
completely to the floor, depress handle release a second
time.
2. Cleaner Height Setting. An adjustment that raises or
lowers the cleaner base to match the type of floor surface.
With the cleaner cord unplugged, set the adjustment to
lowest setting for maximum carpet cleaning. If the cleaner
is difficult to push, move adjustment to next highest
setting until cleaner is comfortable to push. The brush
roll must reach the carpet for effective cleaning. For ease
in moving the adjustment knob, place handle in operating
position and tilt cleaner back to remove weight from front
wheels.
WARNING: Avoid injury. Keep loose clothing, hair,
fingers, and all other parts of body away from
any moving part (such as the revolving
brush). Turn off the switch and unplug the
cleaner before changing the vacuum cleaner
height.
1
Store
Operate
Clean
Under
Helpful Information:
Before cleaning under low
furniture, check area first
for objects that might
harm the unit or block the
vacuum hose.
2
NOTE: While using accessories, do not place cleaner
on furniture or steps as the brush roll may
cause damage. Place cleaner on floor with the
handle in storage position.
• Turn ridge end to center. • Push wands together.
• Grasp both wands near ridges.
Dusting/Upholstery Brush is for furniture, blinds,
books, lamp shades, shelves, curtains, draperies, cushions
and fabrics.
Crevice Wand cleans corners, stairs, baseboards, and
between cushions.
Nested extension wands to add reach.
• Pull apart.
Dusting/Upholstery
Brush
Crevice
Wand
Hose or Wand
7
To Next Page
Loading...
Need help?
General
