SANLI SLB260 - User Manual

Questions and Answers

K
Katherine VincentAug 1, 2025
Why won't my SANLI SLB260 Blower start?
- H
  Hunter VillarrealAug 1, 2025
  If your SANLI Blower engine doesn't start, there are several potential causes. First, make sure you have enough fresh 2-stroke fuel (25:1). A dirty spark plug can also prevent starting, so clean or replace it. Ensure the spark plug is properly connected by pressing firmly on the terminal cover. Fuel older than 3 months should be drained and replaced with fresh 2-stroke fuel. If there's water in the fuel tank, contact an authorized Sanli dealer. For blower vac models, ensure the inlet grill is securely closed. Lastly, a dirty air filter can be the culprit; clean or replace it with a new Sanli air filter.
V
Valerie PorterAug 11, 2025
Why does my SANLI SLB260 engine stop often?
- T
  Tiffany CastilloAug 12, 2025
  If your SANLI Blower engine frequently stops, check the following: A dirty air filter can cause this issue, so clean or replace it with a new Sanli air filter. Make sure the fuel line isn't pinched or blocked, ensuring a clear fuel supply. Also, verify that the vent hole in the fuel tank cap is clear to allow proper venting. Finally, ensure you're using the correct type of fuel; drain the tank and refill with 2-stroke fuel (25:1) if necessary.
P
Paul GrantAug 22, 2025
What to do if my SANLI Blower engine loses power?
- R
  rochaalisonAug 22, 2025
  If your SANLI Blower engine is losing power, start by checking the air filter. A dirty air filter can significantly reduce engine performance; clean or replace it with a new Sanli air filter. Also, ensure that the vent hole in the fuel tank cap is clear, as blocked vent holes can also cause power loss.