SANLI SLB260 - Sanli Blower; Blower Vac Assembly Instructions; Blower Attachment Assembly; Vacuum Attachment Preparation; Vacuum Tube Connection

6 Sanli Blower / Blower Vac User Guide
Blower.
Join the two Blower attachment tubes
together(refertonumber7onpage4)
then attach onto machine as shown in
(Figure 1). Rotate tube clockwise into
locking position then tighten securing
screw.
Vacuum attachments
(BlowerVaconly).
Unscrew locking wing-nut and store safely
untilclosingtheinletgrill(Figure 2).
Attaching the vacuum
tube.
Join the two Vacuum attachment tubes
together
(refertonumber12onpage4)
then open grill and
attach onto machine as
shown
(Figure 3). Rotate tube clockwise
into locking position.
Figure 2.
Figure 1.
Lock
Lock
Figure3.
Assembly instructions