Quick Start
- 08 -
1. Turn on the drone and place it on a horizontal surface.
2. Turn on the power of the remote control, and it will make a beep.
Afterwards, the remote control emits two beeps, indicating that the linking is
successful.
1. During calibration, the remote control beeps, the drone indicators flashes
quickly, and the calibration complete indicator light is always on.
2. When the drone crashes, please recalibrate it.
Use the screwdriver to press down the position shown in the figure, and open
the battery cover to install the battery (not included).
Push the two control sticks downwards outward 45° together.
Tips:
Frequency matching
Calibration
Install the remote control battery
EN
To Next Page
Loading...
