Need help?Do you have a question about the Sansui SR-212 and is the answer not in the manual?
General| Drive System | Belt Drive |
|---|---|
| Motor | 4-pole synchronous motor |
| Speeds | 33 1/3 and 45 RPM |
| Effective Length | 220mm |
| Overhang | 15mm |
| Cartridge Weight Range | 4 to 10g |
| Platter | Aluminum die-cast |
| Signal to Noise Ratio | 50 dB |
| Tonearm Type | Static balanced type |
| Weight | 7.0kg |
| Wow and Flutter | Less than 0.1% WRMS |
Adjusts the auto return position when the stylus reaches the lead-out groove.
Adjusts the height of the tonearm lifter for proper record playback.
To Next Page
