Need help?Do you have a question about the Sansui TU-717 and is the answer not in the manual?
Guidelines for unit placement, cable connections, and ensuring secure connections.
Advice on using soft cloths and avoiding solvents for cleaning the equipment.
Guidance on installing FM antennas for optimal reception and noise reduction.
Instructions for positioning the AM bar antenna and tips for better reception.
Description of power switch, selector, and output level controls.
Details on tuning control, signal meter, and tune meter for station selection.
Explanation of MUTING and NOISE CANCELLER switches for FM.
Adjusts IF bandwidth and sets tape recording levels.
Steps for tuning and listening to AM and FM stations.
Explains causes of FM and AM noise and how to reduce it.
Details on using the provided wrench for tightening knobs.
Importance of outdoor antennas for noise-free reception.
Tips for improving FM reception, addressing multi-path and noise.
Explains multi-path effects and antenna alignment for FM.
Discusses causes of FM noise like weak input or nearby appliances.
Advice for improving AM reception and reducing noise.
Tips for weak AM stations, like re-aligning the antenna or placement.
Causes of AM noise (interference, hum, buzz) and mitigation.
Step-by-step guide for recording FM broadcasts using the unit and a tape deck.
Explains how to use the Band Width switch for optimal FM reception.
Instructions for attaching rack mounting hardware to the unit.
Warning about not removing incorrect screws during installation.
Technical specifications for FM tuning range, sensitivity, and quieting.
FM selectivity, alternate channel selectivity, and capture ratio metrics.
FM image response, spurious response, stereo separation, frequency response, and impedance.
Technical specifications for AM tuning range, sensitivity, selectivity, and distortion.
Details on output level, power requirements, consumption, and weight.
Disclaimer about potential changes to specifications without notice.
To Next Page
General
