Need help?Do you have a question about the Sansui TU-505 and is the answer not in the manual?
General| Tuning Bands | FM, MW |
|---|---|
| Tuning Scale | Analog |
| FM Tuning Range | 87.5 - 108 MHz |
| MW Tuning Range | 535 to 1605 kHz |
| Signal-to-Noise Ratio (MW) | 50 dB |
| Total Harmonic Distortion (AM) | 0.8% |
| Selectivity (MW) | 30 dB |
| Frequency Response (FM) | 30 Hz - 15 kHz |
| Power Supply | 50/60Hz |
Instructions for connecting the FM antenna, AM antenna, amplifier, and tape deck.
Steps for selecting stations and tuning using the signal meter and stereo indicator.
Advice on improving reception for weak or strong FM stations and reducing noise.
Recommendations for improving FM/AM reception with outdoor antennas.
Procedure for replacing a blown power fuse with a new one of the correct rating.
Details about the unswitched AC outlet on the rear panel, its capacity, and usage.
Steps for adjusting the voltage selector for different power supply voltages.
Step-by-step guide on how to string the dial mechanism for proper operation.
Detailed technical specifications for FM and AM sections, power, dimensions, and weight.
Lists included accessories such as antennas, cables, and the service manual.
To Next Page
