Do you have a question about the Sansui T-700 and is the answer not in the manual?
Type | Tuner |
---|---|
Tuning Bands | FM |
Frequency Range FM | 88 to 108 MHz |
Frequency Range AM | 530 to 1600 kHz |
Sensitivity AM | 20 µV (IHF) |
Selectivity | 30dB (MW) |
Frequency Response | 30 - 15, 000 Hz |
Details on connecting the unit to an amplifier and specific jacks like COMPU SELECTOR and TUNER REMOTE.
How to adjust the AM channel selector for regional tuning differences.
Instructions for connecting the AM loop antenna for optimal reception.
Covers indoor T-shaped and outdoor FM antennas, including installation advice.
How to connect 300-ohm or 75-ohm FM antennas to the unit.
Controls the unit's power supply, switching between ON and STAND BY modes.
Indicates when the automatic tuning (AUTO Selection) mode is active.
Shows when an FM or AM station is precisely tuned and locked.
Illuminates when an FM stereo station is received.
Shows the tuned station's frequency in MHz for FM and kHz for AM.
Displays the number of the currently selected preset station.
Used to select the broadcast band (AM or FM).
Buttons to store and recall favorite AM/FM stations.
Controls FM muting and selects reception mode (AUTO/MONO).
Used in conjunction with PRESET STATION switches to store stations.
Selects between automatic (AUTO) and manual tuning modes.
Describes how to memorize station frequencies into PRESET STATION switches.
Allows sequential listening to memorized stations by pressing the PRESET SCAN switch.
Explains how antenna directionality and elements affect FM reception quality.
Guidance on selecting the best location for installing FM antennas.
Discusses combating signal distortion caused by reflected waves.
Technical details for the FM reception section of the unit.
Technical details for the AM reception section of the unit.
Covers general specifications like output, power requirements, dimensions, and weight.