BASIC INFORMATION & PRECAUTIONS
inspection
Inspect the inverter for any damage that may have occurred during shipping. In order to
make sure that the inverter unit is the correct one for your application, check the inverter
type and output ratings on the nameplate. Also make sure that the inverter is intact
.
If you find any difference with the equipment you ordered, or if it is damaged, please contact
your sales representative.
instruments and
parts required for
operation
Instruments and parts to be prepared depend on how the inverter is operated. Prepare
equipment and parts as necessary.
To operate the inverter with high performance for a long time, install the inverter in a proper
place in the correct direction and with proper clearances
Connect the power supply, motor and operation signals (control signals) to the terminal block.
Note that incorrect connection may damage the inverter and peripheral devices
Handle the inverter with care to prevent damage to the plastic components. Do not hold the inverter by the
front cover. It may fall off.
Install the inverter in a place where it is immune to vibration (5.9 m/s
To Next Page
Loading...