Need help?Do you have a question about the Sanus CLASSIC MLT14 and is the answer not in the manual?
Lists all parts and hardware required for the first step of mounting the TV brackets to the TV.
Guide to selecting the correct screw diameter (M5, M6, or M8) for TV mounting.
Guidance on choosing the right screw length and using spacers for different TV back types.
Instructions for attaching the TV brackets to the television, ensuring they are level.
Instructions for locating wall studs and marking the center for wall plate installation.
How to level the wall plate and mark the hole locations on the wall.
Details on drilling pilot holes to the specified depth and diameter for secure mounting.
Instructions for using lag bolts and washers to attach the wall plate, with a caution against over-tightening.
Guide to leveling the wall plate and marking hole locations on concrete or block walls.
Procedure for drilling pilot holes using a masonry drill bit into concrete or block.
Steps for inserting concrete anchors and securing the wall plate with lag bolts and washers.
Instructions for hanging the TV assembly onto the wall plate, ensuring locking tabs engage with an audible click.
How to adjust the tilt tension for the TV mount to control the up/down movement.
To Next Page
General
