Sanus SLT3 - Step 2 C: Attaching Wall Plate (Steel Studs) - Continued; Installing Wall Plate with Screws (Steel)

24 in.
(609 mm)
16 in.
(406 mm)
7
S2
S3
S1
18
19
7. Install the wall plate
19
using four screws
S2
and washers
S3
. Tighten all screws
S2
only until they are pulled firmly against the wall
plate
19
.
CAUTION: Improper use could reduce the holding power of the screws
S2
. DO NOT over-tighten the screws
S2
.