Need help?Do you have a question about the Sanus VMF720-B2 and is the answer not in the manual?
General| Brand | Sanus |
|---|---|
| Model | VMF720-B2 |
| Category | Racks & Stands |
| Language | English |
Provides access to an installation video to demonstrate the ease of the DIY project.
Utilize HeightFinder™ to accurately determine drilling locations for precise installation.
Contact customer support for assistance with installation and product use.
Instructions for removing the TV stand if it is attached before proceeding.
Guidance on installing any purchased accessories before mounting the TV.
Advice on protecting the TV screen when laying it face down for installation.
Contact customer service for assistance if instructions are unclear or safety doubts arise.
Warning about potential personal injuries and property damage during installation.
Adherence to the maximum TV weight limit of 55 lbs (24.9 kg) including accessories is mandatory.
Details on wall types suitable for installation: wood studs, solid concrete, or concrete block.
Caution against installing on drywall alone as it will not support the TV's weight.
List of tools required for general installation, including tape measure, level, drill, etc.
Specific tools needed for wood stud wall installation: stud finder, awl, drill bits.
Specific tools needed for concrete wall installation: concrete drill bits, hammer.
Details on selecting the correct TV screws and washers for attaching the bracket.
Information on using spacers if needed for proper TV bracket fitment.
Identification of vertical and horizontal TV bracket parts and interface screws.
Guidance for flat-back TVs where no spacers are needed for bracket attachment.
Instructions for using spacers with flat-back or irregular TVs for proper fitment.
Warning about screw length: too short won't hold, too long will damage TV.
Instructions for measuring the TV's width (W) and height (H) for bracket adjustment.
Guide on adjusting the TV bracket width (W) to match the TV's mounting holes.
Instructions for assembling the TV bracket for heights of 200 mm or less.
Instructions for assembling the TV bracket for heights greater than 200 mm.
Guidance on loosely assembling the TV brackets to the TV for initial positioning.
Steps for centering the TV brackets on the back of the TV before final tightening.
Instructions for securely attaching the TV brackets to the TV.
Ensuring all screws are tightened properly for a secure TV bracket installation.
Overview of components for Step 2: wall plate template, arm assembly, lag bolts, washers, and anchors.
Details on lag bolts and washers used for securing the wall plate to the wall.
Information on concrete anchors for installations on solid concrete or block walls.
Instructions and precautions for mounting the wall plate on wood stud walls.
Safety warnings for wood stud installation, including drywall thickness and stud size.
Steps to locate, verify, and mark the wall studs for accurate wall plate placement.
Instructions for positioning the wall plate template on the wall for drilling.
Guidance on drilling pilot holes into the center of the wood stud.
Instructions for removing covers from the arm assembly after drilling.
Instructions and precautions for mounting the wall plate on concrete or block walls.
Guidelines for mounting the wall plate directly onto concrete surfaces.
Instructions for positioning the wall plate template on concrete for drilling.
Guidance on drilling holes into concrete walls for anchor insertion.
Instructions for inserting anchors flush with the concrete surface.
Instructions for removing covers from the arm assembly after drilling.
Instructions for securely tightening the lag bolts for the wall plate on concrete.
Steps to insert covers onto the mounted wall plate.
Instructions for hanging the TV onto the wall plate, advising assistance for heavy loads.
Details on the securement screw and hex key used to fasten the TV to the wall plate.
Procedure for attaching the TV to the wall plate.
Ensuring the securement screw is tightened to firmly attach the TV to the arm assembly.
Instructions for routing cables through the arm assembly, ensuring slack.
Procedure for attaching cable covers after routing the cables.
Steps for adjusting the TV's levelness using specific screws.
Instructions for adjusting the TV's tilt tension for desired viewing angles.
Guidance on adjusting arm tension for extending or retracting the TV, if necessary.
Steps to disconnect cables and remove the securement screw before detaching the TV.
Instructions for releasing the TV using the release cord and lifting it from the arm assembly.
Using supplied spacers for flat-back TVs to position them closer to the wall.
Using spacers for TVs with rounded backs or for extra cable space.
Guidance on selecting correct screw length to ensure secure attachment and prevent damage.
Information on registering your SANUS product for sweepstakes entry and warranty.
Contact information for customer support and sweepstakes details.
To Next Page
