Need help?Do you have a question about the Sanus VLT16 and is the answer not in the manual?
General| Mounting type | Wall |
|---|---|
| Maximum VESA mount | 750 x 400 mm |
| Minimum VESA mount | 100 x 100 mm |
| Maximum screen size | 85 \ |
| Minimum screen size | 40 \ |
| Maximum weight capacity | 56.7 kg |
| Number of displays supported | 1 |
| Tilt angle range | 0 - -10 ° |
| Height adjustment | No |
| Package depth | 412 mm |
| Package width | 955 mm |
| Package height | 63 mm |
| Quantity per pack | 1 pair(s) |
Weight and Dimensions| Width | 744 mm |
|---|---|
| Height | 439 mm |
| Depth (max) | 20 mm |
Verify TV weight, wall type, and tool availability before starting installation.
Describes TV bracket compatibility with hole patterns and side-to-side adjustment.
Highlights kick stands for cable space and tilt/level adjustment features.
Lists and identifies all parts and hardware included in the package.
Details lag bolts, concrete anchors, wall plate, washers, and Allen key for wall plate installation.
Guides on choosing the correct screw diameter and length for TV attachment.
Instructions for locating studs, marking, and drilling pilot holes for wall plate attachment.
Instructions for marking and drilling pilot holes into concrete or block for wall plate attachment.
Guides on hooking TV brackets onto the wall plate and securing the TV.
Using release cords and kick stands to create space for connecting TV cables.
Adjusting TV tilt tension and leveling using the provided hex key and screws.
Instructions for sliding the TV laterally and safely removing it from the wall plate.
To Next Page
