Need help?Do you have a question about the Sanus VSF716-B2 and is the answer not in the manual?
General| Category | Racks & Stands |
|---|---|
| Model | VSF716-B2 |
| Construction Material | Steel |
| Color | Black |
| Adjustable Tilt | Yes |
| Type | Wall Mount |
| Max Screen Size | 90 inches |
| VESA Compatibility | Up to 600x400 mm |
| Max Weight Capacity | 150 lbs |
Watch a video to see how easy the DIY project is.
Use HeightFinder to determine the correct drilling location.
Get assistance from install experts via phone.
Detach the TV stand if it is attached to the television.
Install any necessary accessories before mounting the TV.
Protect the TV screen by laying it down carefully for installation.
Do not exceed the specified weight limit of 35 lbs (15.8 kg) for the TV and accessories.
Install only on wood studs, solid concrete, or concrete block walls.
Lists necessary tools for mounting on wood studs.
Lists necessary tools for mounting on concrete.
Lists all parts and hardware required for Step 1.
Choose the correct screw diameter that fits your TV.
Determine the proper screw length and if spacers are needed for your TV.
Securely attach the TV bracket to the television using the appropriate hardware.
Lists all parts and hardware required for Step 2.
Instructions for installing the wall plate on wood stud walls.
Instructions for installing the wall plate on concrete or block walls.
Lists all parts and hardware required for Step 3.
Route cables through the mount arm for a clean installation.
Secure the cable covers to hide wiring.
Adjust the TV for perfect horizontal leveling.
Adjust the TV tilt tension for desired viewing angles.
Guidance on using TV-supplied spacers for proper installation.
To Next Page
