How to adjust the tilt on Sanus Racks & Stands?
To adjust the tilt of your Sanus Racks & Stands TV, loosen the knob on the TV bracket. Once you've set your TV to the tilt you want, tighten the knob to secure it.
What to do if I need to remove TV from Sanus Racks & Stands?
To remove the TV from Sanus Racks & Stands, put the locking tab into the unlocked position. Then, lift the TV up and away from the wall plate.
General| Mounting type | Wall |
|---|---|
| Maximum VESA mount | 200 x 200 mm |
| Minimum VESA mount | 75 x 75 mm |
| Maximum screen size | 40 \ |
| Minimum screen size | 19 \ |
| Maximum weight capacity | 22.68 kg |
| Panel mounting interface | 75 x 75, 100 x 100, 200 x 100, 200 x 200 mm |
| Number of displays supported | 1 |
| Tilt angle range | -12 - 12 ° |
| Product color | Black |
Weight and Dimensions| Width | 225.3 mm |
|---|---|
| Weight | 1500 g |
| Depth (max) | 45.2 mm |
Use the magnetic stud finder to find screws indicating stud location on the wall.
Utilize the probing pin to locate the precise edges and center of wall studs.
Verify the TV's weight does not exceed the mount's capacity for safe use.
Confirm wall type (wood studs or concrete) and stud center for secure mounting.
Ensure all necessary tools are gathered and read instructions before starting.
Choose the correct screw diameter and spacers based on TV model and back type.
Measure VESA pattern and attach extension plates if required for specific TV sizes.
Mount the TV bracket onto the TV using the selected hardware combination.
Mount the wall plate securely into wood studs using lag bolts and a template.
Mount the wall plate into concrete or block walls using anchors and lag bolts.
Learn how to adjust the TV's viewing angle using the bracket's tilt knob.
Safely detach the TV from the wall plate by unlocking the locking tabs.
To Next Page
