14
6 7
≈ 13 mm
(
1/2 in.)
6. Remove the wall plate template
10
and insert two anchors
14
into the outer top holes.
CAUTION: Be sure the anchors
14
are seated flush with the drywall surface.
7. Partially install the top two lag bolts
13
into the anchors
14
, leaving about 13 mm (1/2 in.) space from the wall.
NOTE: This space allows you to hang the wall plate
11
onto the top lag bolts
13
.
14
10
13
To Next Page
Loading...
