To Next Page
A
Ann KingSep 8, 2025
How to fix restricted fuel supply in SANY SRSC4531G?
- CcolleenwalkerSep 8, 2025
If you have restricted fuel supply in SANY Farm Equipment, replace the fuel filter.
How to fix restricted fuel supply in SANY SRSC4531G?
If you have restricted fuel supply in SANY Farm Equipment, replace the fuel filter.
Why the engine does not start in my SANY SRSC4531G?
If the engine of your SANY Farm Equipment does not start, one potential cause is that the 230 V connection for the engine heater is not connected. In this case, remove the 230 V cable from the socket. Another potential cause is a malfunction in the safety system. If this is the case, contact a maintenance technician.
How to fix a battery malfunction in SANY Farm Equipment?
If your SANY Farm Equipment experiences a battery malfunction, check if the battery poles are free of dirt and are connected correctly.
What to do if movements of boom or spreader are limited in SANY Farm Equipment?
If your SANY Farm Equipment is experiencing limited movements of the boom or spreader, it could be due to an overload situation that has caused an overload cut-off. To resolve this, return the machine to a safe state by using load-reducing movements.
Why the ignition cannot be switched on in SANY SRSC4531G?
If the ignition cannot be switched on in your SANY Farm Equipment, it could be because the ignition fuse has been tripped. If the fuse is defective, find the cause of the fault. If no defective components are evident, replace the fuse.
What to do if SANY SRSC4531G does not react to the ignition being turned on?
If the machine does not react to the ignition being turned on, it may be because the 230/400 V power supply is connected, and the delayed start relay prevents the machine from starting. Disconnect the machine from the power supply before starting operations.
What to do if parking brake was not engaged and enabled automatically in SANY SRSC4531G?
If the parking brake was not engaged the last time work was completed and has been enabled automatically on your SANY Farm Equipment, first disengage the parking brake and then reactivate it.
Why additional 24 V DC voltage supply in the cabin control box does not function in SANY Farm Equipment?
If the additional 24 V DC voltage supply in the cabin control box of your SANY Farm Equipment does not function, the voltage supply fuse may have been tripped. If the fuse is defective, find the cause of the fault.
What does error message 'Cabin or control lever' mean on SANY SRSC4531G Farm Equipment?
If you see the error message 'Cabin or control lever' displayed on your SANY Farm Equipment, a fuse for one of the sensors may have been tripped. If the fuse is defective, find the cause of the fault.
What to do if no boom movements possible in SANY Farm Equipment?
If you are experiencing no boom movements possible with your SANY Farm Equipment, the joystick fuse may have been tripped. If the fuse is defective, find the cause of the fault.
General| Brand | SANY |
|---|---|
| Model | SRSC4531G |
| Category | Farm Equipment |
| Language | English |
Details of the manufacturer including name and physical address.
Information on the authorized representative for technical documentation compilation.
A preface or introduction to the user manual's purpose and content.
Explanation of how the user manual is organized into chapters and subchapters.
Explanation of symbols and text conventions used for clarity.
Details on how safety instructions are classified by signal words and colors.
Specifies the machine's designed purpose and operational scope.
Describes actions and scenarios considered improper or unintended use.
Outlines the responsibilities of the machine operator.
Details the responsibilities for maintenance and specialized personnel.
Addresses risks associated with operating on different ground conditions.
Details the risks posed by wind speed during machine operation.
Information on risks related to overhead power supply lines.
Safety precautions for operating in environments with fire or explosion risks.
Guidelines for operating the machine during thunderstorms.
Identifies general hazardous areas and associated dangers on the truck.
Highlights potential dangers related to the hydraulic system.
Details electrical hazards and safety precautions.
Lists and describes essential personal protective equipment for operation.
Describes the general characteristics and capabilities of the machine.
Provides a labeled diagram of the machine's main components.
Details the cabin's design, adjustability, and functionality.
Information on emergency exit procedures and fire suppression equipment.
Describes seat sensors, rear-view mirrors, and optional cameras.
Details reversing camera and cabin roof window heating systems.
Describes the machine's chassis and counterweight mechanisms.
Information on maintenance access points and gas pressure springs.
Details on features for operator access and visibility.
Overview of the drive system and access to the engine bay.
Technical details on the engine and gearbox.
Description of the system for reducing exhaust emissions.
Explanation of the machine's steering mechanism.
Details on wheel types, tyre pressure, and fitting.
Identification of wheel rim parts like side and lock rings.
Details on the various lights used on the machine.
Information on fuse locations, types, and switch cabinet organization.
Description and operation of the emergency stop buttons.
Details on the rotating beacon and the main power switch.
Explanation of how to engage, disengage, and use the parking brake.
Details on the operation and indicators of the twistlock system.
Description of the panoramic camera system for enhanced visibility.
Details on the front camera system for viewing obstacles.
Information about the camera system mounted on the spreader.
Explanation of the reverse obstacle detection system.
Information on the 230/400 V external power supply connection.
Details on systems for heating machine tanks.
Description of the fire suppression system and its operation.
Details on the system for monitoring and controlling tyre pressure.
Information on the heating system for the rear windscreen.
Details on the heating system for the cabin roof window.
Information on automatic and manual lubrication system options.
General overview of controls and displays located within the cabin.
Details on the main display's areas, buttons, and navigation.
Explanation of the load pick-up display and twist-lock status indicators.
How to use the direction lever for gear selection and turn signals.
Description of toggle switches for parking brake, lights, and hazard warnings.
Operation of switches for spreader, cabin, and counterweight movement.
Details on operating the radio, including controls and functions.
How to operate the air conditioning system and its settings.
Information on the auxiliary heating system and its controls.
Details on the control unit for the fire extinguishing system.
Instructions for operating the window heater function.
Description of the external display for fluid levels and operating hours.
Information on the main switch's function and battery disconnection.
Details on the operator ID system for access control and restrictions.
How to access and navigate the main menu of the machine's software.
Explanation of status and error message symbols on the information board.
Information on displaying engine parameters and error messages.
Information on diagnosing engine malfunctions and error codes.
Details on displaying gearbox parameters and error messages.
Information on displaying hydraulic system parameters and errors.
Accessing machine status and error information.
How to view and interpret general error messages.
Information on displaying component operating hours.
How to view information about the machine's software versions.
Details on accessing and using the service menu.
Manual operation and status display for the lubrication system.
How to display the status of signals for main control and IO nodes.
Procedures for setting the machine's time and date.
Explanation of the joystick's functions and configurations.
How to configure and control the air conditioning system via software.
How to check tyre pressure using the machine's interface.
Procedure for assigning new tyre pressure sensors to tyres.
Explanation of symbols used in user interfaces for status and error messages.
Steps for cleaning machine components before starting daily operations.
Guidelines for performing visual inspections before operation.
Checks for leak-tightness, wear, and play in the steer axle components.
Checks for tyre wear, damage, and penetration by foreign objects.
Inspection checks for hydraulic leaks, damaged hoses, and rips in the boom.
Checks for leaks, damage, and wear on spreader components.
Checks for wear or damage to windscreen wiper blades.
Procedure for checking and refuelling the machine's fuel tank.
Procedure for checking and refilling the Diesel Exhaust Fluid (DEF) tank.
Procedure for checking and adjusting tyre pressure.
Procedure for checking and topping up windscreen washer fluid.
Procedure for checking the hydraulic oil level.
Procedure for checking the brake fluid fill level.
Procedure for checking and topping up the engine coolant level.
Procedure for checking and topping up the engine oil level.
Procedure for checking and topping up the gearbox oil level.
Instructions for adjusting the seat for comfort and ergonomics.
Details on adjusting headrest, armrest, backrest, and suspension.
How to adjust seat height and steering wheel position.
Procedure for checking the machine's protective devices.
Steps for performing a functional check of the boom.
Steps for performing a functional check of the spreader.
Instructions for safely entering and exiting the machine.
Step-by-step guide for starting the machine's engine.
Special considerations for starting the machine in cold weather.
Basic procedures for operating the machine, including gear selection.
Guidelines on speed adjustment, slope driving, and restart procedures.
Describes correct driving positions with and without loads.
Instructions for driving the machine in the forward direction.
Instructions for driving the machine in the reverse direction.
Safety precautions and techniques for driving the machine around curves.
Procedure for bringing the machine to a complete stop.
Steps for properly stopping, parking, and switching off the machine.
Instructions for moving the cabin forwards and backwards.
Procedure for extending and retracting the movable counterweight.
Information on load diagrams, capacity limits, and overload prevention.
Step-by-step guide for safely lifting containers.
Guidelines for safely driving the machine while transporting a load.
Step-by-step guide for safely setting down containers.
Instructions for cleaning the machine after use.
How to access and configure machine settings via menus.
Guidance for operators on identifying and resolving machine faults.
Advanced troubleshooting options for maintenance technicians.
Lists intentional deviations that may appear as errors.
General troubleshooting steps for operational issues.
Troubleshooting specific issues affecting machine performance.
Solutions for miscellaneous operational errors and problems.
Troubleshooting steps for electrical system faults.
Troubleshooting for problems related to the 230/400 V power supply.
Interpreting and resolving error messages displayed on the main screen.
Troubleshooting guide for the back-up obstacle detection system.
Information on fuses, their types, and replacement procedures.
Procedure for manually releasing the parking brake in emergencies.
How to use the emergency operation mode for load-reducing movements.
Instructions for manually moving the cabin if hydraulic systems fail.
List of available optional equipment and system settings for the truck.
Tables detailing load capacities under various conditions.
Detailed technical specifications and dimensions of the reach stacker.
Specifications related to the spreader attachment.
Information on required operating materials, fluids, and their specifications.
Guidelines for selecting and using engine oil based on ambient temperature.
Guidelines for selecting and using gearbox oil based on ambient temperature.
Guidelines for selecting and using hydraulic oil, warning against mixing.
Oil recommendations for the spreader slew gearbox based on temperature.
Oil and grease recommendations for the drive axle based on temperature.
Fuel recommendations for different engine types, including sulphur content.
Information on Diesel Exhaust Fluid (DEF) composition and handling.
Guidelines for handling DEF, storage conditions, and measures for leaks.
Definitions of technical terms and acronyms used in the manual.
Alphabetical listing of topics and their corresponding page numbers.