Sanyo CDF-R800 Service Manual

DISASSEMBLY
L
CD MECHANISM
A. How to remove pick up.
1. Make the FPC’Sshort-round short-circuit.(A-l )
2. Remove a screw ~ fixin pick up. (A-1)
d
3. Pickup (@ and shuft E12 will come off.(A-l )
Q
E6
,
L.
I
— - .-- .--- —-------------------------
o
10$(
B. How to remove feed motor.
1. Remove 4 screws ~ Fixing damper. (A-2)
2. Remove 3 springs ~ and a spring ~
3. Pull magnetic coil m to rotate gear ~.
Continue it until microswitch ~ turns on.
Then move CD unit to gear - side and pull it up to
A– 1
remove it.(A-2)
4. Remove a screw @ fixing the motor.(A-3)
5. Motor @ and fixture ~ will come off.(A-3)
6
105
A–2
o
Io5
.(A-2)
–2–

Sanyo CDF-R800 Specifications

General

Brand	Sanyo
Model	CDF-R800
Category	Car Receiver
Language	English