I
HANDLING COMPACT DISCS
I
This unit is designed to play compact discs
bearing the identification logo below. Discs that
do not carry this logo may not conform to the CD
standard and may not play properly.
,.,
diii!
DIGITAL AUDIO
Dirty, scratched or warped discs may cause
skipping or noise. Pay attention to the fol-
lowing:
s Handle the disc only by the edges. To keep
the disc clean, do not touch the surface of
the disc.
● Discs should be returned to their cases after
use to avoid serious scratches that could
cause the laser pickup to skip.
● Do not expose discs to direct sunlight, high
humidity, or high temperatures for extended
periods. Prolonged exposure to high tem-
peratures can warp the disc.
● Do not apply paper or write anything on
either side of the compact disc. Sharp writ-
ing instruments, or the inks used in some
felt-tip pens, may damage the surfaces of
the disc.
c Fingerprints should be carefully wiped from
the surface of the disc with a soft cloth.
Unlike conventional records, compact discs
have no grooves to collect dust and micro-
scopic debris, so gently wiping them with a
soft cloth should remove most particles.
Wipe in a straight motion from the inside to
the outside of the disc. Small dust particles
and light stains will have no effect on repro-
dudicm quality.
● Never use such chemicals as record sprays,
anti-static sprays, benzene or thinner to
clean compact discs. Such chemicals can
darrrage the plastic sutface of the disc.
● The unit will not play a disc that has been inserted upside down, or discs which do not
conform to the Compact Disc standard. Also, the unit may not play discs that are scratched,
soiled or carry fingerprints.
● 8 cm CDs can b~ ‘%yed without an adaptor.
-12-
To Next Page
Loading...
