-3-
N2WLD/YLD
To enter to the Service Mode
+ Press and hold the GREEN button on the remote control and then press the P▼ button on the cabinet.
To select the service item and change data value
+ To select the adjustment item, use the P▲ or P▼ button.
+ To change the service data, use the Volume -(LEFT) or Volume + (RIGHT) button.
+ The data which is set in the service mode is stored into the memory IC automatically.
EXAMPLE: 000 UK4A 05.13
ITEM NO SECTION VALUE
ITEM
Exit from the Service Mode
+ Press the MENU button or turn off the TV set by using the Mains switch.
OPTION SETTINGS
UK4A ALIGNMENT MATRIX
OPTIONS CE27LC6-B CE27LD6-B CE27LC6BK-C CE27LD6BK-C CE32LC6-B CE32LD6-B CE32LC6BK-C CE32LD6BK-C
SERVICE ITEM 253 11111111
SERVICE ITEM 252 11111111
SERVICE ITEM 251 11111111
SERVICE ITEM 250 11111111
SERVICE ITEM 249 11001100
SERVICE ITEM 248 00000000
SERVICE ITEM 247 11111111
SERVICE ITEM 246 01010101
SERVICE ITEM 245 00000000
SERVICE ITEM 244 11111111
SERVICE ITEM 243 00000000
SERVICE ITEM 242 00000000
SERVICE ITEM 241 11111111
SHIPPING CONDITIONS
PERSONAL DYNAMIC STANDARD ECHO
BRIGHTNESS 3 2 3 2 3 2 2 0
CONTRAST 4 0 5 0 4 0 3 1
COLOUR 3 2 3 2 3 2 2 0
SHARPNESS 3 2 3 2 3 2 1 6
PRESET
NOISE REDUCTION LOW LOW LOW LOW
DYN SKIN TONE ON ON ON ON
TEXT BRIGHTNESS MID MID MID MID
AT S
HDD
PATH HDD
COLOR SYS
AFC
EU0 UK1IRE2UI3
PC
HD
DIG
BASS
SURROUND
WEL TXT
P&P