Sanyo CE32LD81-B - Picture and Sound Enhancements; Noise reduction, film mode, picture zoom, and reset options for picture quality; Overview of accessing and adjusting audio settings via the sound menu; Adjusting volume and customizing sound frequencies using the equalizer

English - 32 -
Noise Reduction
If the broadcast signal is weak and the picture
is noisy, use
Noise Reduction setting to
reduce the noise amount.
Press or button to select Noise
Reduction
. Press

/

to choose from one of
these options:
Low, Medium, High or Off.
Film Mode
Films are recorded at a different number of
frames per second to normal television
programmes.
Press
or button to select Film Mode.
Press

/

button to set this feature On or Off.
Turn this feature on when you are watching
films to see the fast motion scenes clearly.
3D Comb
3D Comb is used to improve colour transitions
and colour quality of pictures.
Select 3D Comb by pressing

/

button.
Press

/

button to set this feature On or Off.
Note: 3D Comb feature is not functional in NATU-
RAL picture mode.
Picture Zoom
Select Picture Zoom by pressing

/

button.
Use

/

buttons, to change picture zoom to
Auto, 16:9, 4:3, Panoramic, 14:9 Zoom,
Cinema, Subtitle
or Zoom.
Reset
Press or button to select Reset. Press

/

or OK button to reset the picture modes to
factory default settings.
Store
Press or button to select Store. Press

or OK button to store the settings. “Stored”
will be displayed on the screen.
Sound Menu
SOUND
Volume
Equalizer
Balance
Headphone
Sound Mode
Volume
Press or button to select Volume. Press

/

button to change the level of the Volume.
Equalizer
Press or button to select Equalizer. Press

/

or OK button to enter equalizer menu.
In equalizer menu the sound mode can be
changed to
Pop, Rock, Jazz, Flat, Classic or
User by pressing

/

button. Select the
desired frequency by
or button and
increase or decrease the frequency gain by
pressing

/

button.
Press the
MENU button to return to the previous
menu.
Note: Equalizer menu settings can be
changed only when the
Equalizer Mode
is in User.
Balance
This setting is used for emphasizing left or
right speaker balance.
Press or button to select Balance. Press

/

button to change the level of the balance.
Balance level can be adjusted between
-32
and + 32.
ENG-32781W-1050 UK-32INCH-17MB12 UK IDTV-(2 HDMI-3D PAN-WO SVHS-BASIC PIP-VGA)-C2-50125434.p6522.03.2008, 11:4332