English - 39 -
PC Mode Menu System
See “Connecting the LCD TV to a PC” section
for connecting a PC to the TV set.
For switching to
PC source, press “AV” button
on your remote control and select
PC input.
You can also use
“Source” menu to switch to
PC mode.
Note that PC mode menu settings are
available only while the TV is in PC source.
Sound Menu
The items in this menu are described at
“Sound Menu” section explained in
“Analogue TV Menu System”.
Feature Menu
Feature menu settings are identical to the
settings explained in “
Feature Menu” section
in “Analogue TV Menu System”.
PC Picture Menu
For adjusting PC picture items, do the
following:
Press
/ button to select the second icon.
PC Picture menu appears on the screen.
Brightness, Contrast and Colour
Temperature
settings in this menu are
identical to settings defined in TV picture
menu under “Analogue TV Menu System”.
PC Position Menu
Select the sixth icon by pressing / button.
PC Position menu appears on the screen:
PC POSITION
Autoposition
H Position
V Position
Phase
Dot Clock
Autoposition
If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
This setting therefore automatically optimizes
the display.
Select Autoposition item by using
or
buttons. Press OK button.
Warning: Please ensure auto adjustment is
performed with a full screen image
to ensure best results.
H (Horizontal) Position
This item shifts the image horizontally to right
hand side or left hand side of the screen.
Select H Position item by using or button.
Use
/ button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards
the top or bottom of the screen.
Select
V Position item by using or button.
Use
/ button to adjust the value.
ENG-32781W-1050 UK-32INCH-17MB12 UK IDTV-(2 HDMI-3D PAN-WO SVHS-BASIC PIP-VGA)-C2-50125434.p6522.03.2008, 11:4339
To Next Page
Loading...
