Sanyo CH1271 - Wired Remote Display Symbols

3
REMOTE CONTROL UNIT (DISPLAY)
(1) Operation mode
AUTO .....................................
(only for COOL/DRY/HEAT
Model)
HEAT......................................
(only for COOL/DRY/HEAT
Model)
MILD DRY ..............................
COOL.....................................
FAN ........................................
(2) Fan speed
Automatic operation ...............
HIGH .....................................
MEDIUM.................................
LOW.......................................
(3) Temperature setting
60 – 86 °F ..............................
When set to 80 °F
temperature indication ...........
(4) Timer
24-hour clock with ON/OFF
program Timer .......................
ON Timer. ..............................
OFF Timer. ............................
1-hour OFF Timer. .................
(5) NIGHT SETBACK..................
(6) Flap angle indication..............
Sweep indication....................
Displayed when indoor unit
sensor is in use
Displayed when operating
NIGHT SETBACK mode
Displayed when setting temperature
Displayed when temperature is shown
Displayed when setting timer
Symbols
OI-119-3-EG
01_STK-RCS-7TWSU_EN.fm Page 3 Tuesday, October 14, 2008 1:48 PM