To Next Page
C
Christian DaviesAug 7, 2025
What to do if my Sanyo Air Conditioner does not turn on?
- SSheri LongAug 7, 2025
If your Sanyo Air Conditioner doesn't turn on, consider these potential causes and solutions: * If the air conditioner is in shutdown mode or was switched on after a power failure, press the ON/OFF button on the wireless remote again. * Ensure the local power switch is set to 'on'. * Check for blown fuses and contact your dealer if any have blown. * Clear any active timer operations. * Verify that the signal receiver’s NORMAL/ALL OFF switch is set to 'NORMAL'. * Replace the batteries in the wireless remote if they are depleted. * Adjust the operation mode if the indication lamps show a cooling/heating mismatch or if the auto cooling/heating function is unavailable.
General
