Sanyo CH1271 - Removing Fan Motor & Turbo Fan

7-3-9. Remove the turbo fan and fan motor.
(1) Remove a nut and remove the turbo fan. (Fig. 22)
(2) Remove the 2 screws and 3 nuts, and remove the fan motor. (Fig. 23)
7-3-10. Remove the heat exchanger.
(1) Remove the 3 screws. (Fig. 24)
(2) Remove the 3 screws. (Fig. 25)
(3) Remove the heat exchanger from the main body upper section with the heat exchanger lifted.
Fig.22 Fig.23
Fig.24 Fig.25
Turbo fan
Nut
Screw Nut
Fan motor
Screw
ScrewHeat exchanger
Screw
Main body
upper section
45