Do you have a question about the Sanyo COOL/DRY/HEAT KHS3082 and is the answer not in the manual?
Brand | Sanyo |
---|---|
Model | COOL/DRY/HEAT KHS3082 |
Category | Air Conditioner |
Language | English |
Covers 24-Hour ON/OFF Timer and 1-Hour OFF Timer for automated operation.
Details Night Setback, Air Sweep, Auto Flap, and Fan Speed adjustments.
Explains High Power, Quiet, LED Clean, Unoccupied, and Auto Restart features.
Describes automatic cooling/heating switching and hot start heating system.
Mentions the Air Clean Filter for odor and dust removal.
Details necessary information for customer inquiries and service.
Explains symbols indicating potential hazards to users and the appliance.
Provides guidance on safe and effective placement of the air conditioner.
Outlines necessary electrical codes and grounding for installation.
Identifies and illustrates the components of the indoor and outdoor units.
Explains the indicators and buttons on the indoor unit control panel.
Covers symbols for operation modes (AUTO, HEAT, COOL, etc.) and fan speeds.
Explains symbols for timers (ON, OFF, 1H) and settings like Night Setback.
Details symbols for flap direction, sweep, high power, quiet, LED clean, and unoccupied modes.
Covers display info, ON/OFF, LED CLEAN, QUIET, and FAN SPEED buttons.
Details FLAP, ON/OFF TIME setting, and CANCEL buttons.
Explains SENSOR, ADDRESS switch, and Temperature Display Selector functions.
Explains the MODE selector and Temperature setting buttons.
Covers NIGHT SETBACK, HIGH POWER, UNOCCUPIED, and ACL buttons.
Details the 1-Hour Timer, CLOCK, and SENSOR buttons.
Step-by-step instructions for inserting batteries into the remote control.
Recommendations and warnings for placing the remote control unit.
Instructions on how to mount the remote control unit on a wall.
Advice on how to properly aim the remote control at the indoor unit.
Explains how the unit automatically switches between cooling and heating.
Step-by-step guide for manually selecting modes, temperature, fan speed, and airflow.
How to set the fan to automatically adjust speed based on room temperature.
How to manually select desired fan speeds (High, Medium, Low).
Explains logic for heating/cooling, DRY mode, and performance.
Covers defrosting, cold draft prevention, power failure, and clicking sounds.
Notes on how the remote control unit communicates with the air conditioner.
Guide to accurately setting the current time on the remote control.
Instructions for programming the unit to turn off at a specific time.
Instructions for programming the unit to turn on at a specific time.
Details the procedure for activating and canceling the 1-hour timer.
How to adjust the horizontal vane direction manually.
How to adjust vertical airflow using the flap and sweep functions.
Explains how to set the flap for automatic up-and-down airflow.
How to manually select one of six airflow direction positions.
Describes the automatic flap positioning for optimal comfort.
Instructions for cleaning and replacing anti-mold and air clean filters.
Guidance on cleaning the main unit, including front panel removal.
Lists problems like no operation, blinking lights, poor performance, and their solutions.