MAINTENANCE
Cleaning the decks A and B heads
To ensure playback and recording with good-quality sound, use cotton
swab to clean the heads, pinch rollers and capstans of the decks after
about every 10 hours of use.
If the dirt persists, soak the swab in a little methylated spirit or head
cleaning fluid and then clean.
,llJ ,Jd
Main unit
I
5
Use a soft cloth to remove dirt on the main unit.
If the dirt persists, dip a soft cloth into a diluted solution of neutral
detergent, wring it out, wipe away the diit, and then take up any moisture
1.
2,6.
with a dry cloth.
Do not use benzine, thinners or alcohol since they will marthefinishofthe
3,7.
5.
surfaces.
4, 8.
Tuner section
Reception frequency:
FM: 87.5-108 MHz
AM: 522-1710 kHz
CD player section
Channels:
2-channel stereo
Sampling frequency:
44.1 kHz
Pick-up:
Optical 3-beam semiconductor laser
Frequency response:
20
I-iz to 20 kHz
Wow/f Iutter:
Below measurable limits
Cassette deck section
Track system:
4-track, 2-channel stereo
‘-equency response:
80
tiz to 13.5 kHz
Signal-to-noise ratio:
50 dB
Wow/flutter:
0.15% (WRMS)
Fast forward/rewind time:
Approx. 110 sec. (C-60)
Amplifier section
Output power:
5 W x 2 (at 4 ohms, 10’%.distortion)
Graphic equalizer:
*1O dB (300 Hz, 1kHz, 10kHz)
Inputs
PHONO: 2.5 mV/50k ohms
outputs
SPEAKERS: 4 ohms
PHONES: 8-32 ohms
SPECIFICATIONS
I L,
1
L--7
4
8
Cotton swab
Capstan
Pinch roller
Erase head in DECK B
Record/Play head (Play head in DECK A)
Power requirements:
AC 230-240 V, 50
tiz
Power consumption:
50 w
Dimensions:
270(W) x 285(H) x 186(D) mm
Weight
3.8 kg
Speaker systems
Type:
2 way bass reflex
Unit used:
Woofer: 12 cm cone type
Tweeter: piezoelectric
Maximum power-handling capacity:
10 W (peak)
Nominal impedance:
4 ohms
Dimensions:
180(W) x 285(H) x 191 (D) mm
Weight:
1.4 kg (per speaker)
Specifications subject to change without notice,
-10-
To Next Page
Loading...
