4
BASIC CONNECTIONS
After all connections have been made, connect the mains lead to an AC outlet.
Note:
- Do not connect the mains lead to an AC outlet until all connections have been made.
- The system is not completely disconnected from the mains when the z/ON button is set to the z position.
Speaker connections
To achieve proper stereo reproduction, connect the speaker wires without shorting to adjacent wires as shown in figure.
Tube of speaker wire Use
(Positive polarity)
FRONT R (Red) Front right speaker
FRONT L (White) Front left speaker
CENTER (Green) Centre speaker
REAR R (Gray) Surround right speaker
REAR L (Blue) Surround left speaker
SUBWOOFER (Violet) Subwoofer
Note:
The SPEAKERS sockets are designed for use only with the supplied
speakers. Do not use with other speakers. Connecting other speaker may
damage the speaker and/or the unit.
If using other speakers, check their impedance/input power.
8 Ω or more/70 W or more
Front right speaker Front left speaker Centre speaker
Surround right speaker Surround left speaker
Subwoofer
Twist and pull it
off.
Red
White
Violet
Blue
Gray
Green
To Next Page
Loading...
